### Understanding LED Wear & Used Red Light Beds (and Pads and Pods, on the same note)
Unlike traditional lights (or lasers), LEDs don’t “burn out” or suddenly fail. Instead, they gradually lose brightness over time. This phenomenon is known as **depreciating lumen**. This means a used red light bed may still function well but could require slightly longer session times to achieve the same results to make up for the lost lumens.
Every **used bed we sell is priced based on its age and actual irradiance**, measured against the manufacturer’s original specs. For example, if a bed originally had an irradiance of **65 mW/cm²** but now measures **52 mW/cm²**, that’s about a **20% reduction in power**.
### How We Price Used Beds, Pads and Pods
As a general rule, red light units (pods, pads, beds) **lose about 10% of their value per year**. If a $50,000 unit (say, bed) is **three years old** and has **20% lower irradiance**, its price is adjusted accordingly:
*30% depreciation for age**
*20% additional reduction for lower radiance**
**Final price: $28,000.**
However, this formula assumes **constant daily use**. Beds that were used less frequently may not experience the full 10% annual depreciation.
### It is Possible to Get an Even Bigger Discount?
Many clinics looking for a **quick sale** are willing to go **even lower than our standard pricing formula**.
**If you’re interested in a used red light bed, fill out the form below. Most used beds are at least 50% off and sometimes even cheaper!**
Call now to check our current stock of used red light units.
Phone no: 1-888-547-5296. Ask for **Sue (me)** or my partner. We’ll help you find the best used red light unit suitable for your ask (price, age, quality, shape, type, burn rate, desired session lengths, commercial versus perosnal use - taking everything into consideration).
Complaints and concerns about red light beds, pads and pods
IMPORTANT: PLEASE READ THIS PAGE BEFORE CALLING ME.
For details, visit my Red Light Complaints Page HERE
What's NEW?
LATEST CHANGES IN RED LIGHT BEDS AND PADS
Prices: Prices have dropped – while advertised prices remain the same, costs have decreased.
Design: Zero gravity-shaped designs. Perfect for those who prefer neither flat nor concave styles.
Shape: New designs – top canopies are now positioned closer to the body.
Covers: 1/32-inch plastic covers. 1/8-inch covers have become less common.
Machine weight: Between 100 and 200 lbs – no more bulky 500 to 800 lb red light beds.
EMF: Lower EMF – now compatible with standard 110V outlets, eliminating the need for 20 or 30 amp connections.
Source of heat: High-heat circuit boards are mostly a thing of the past. Users feel relaxed due to circuit board heat, not the red light itself.
Quietness: Loud fans are no longer needed due to low-heat circuit boards.
Smell (off-gassing): Off-gassing has mostly been addressed. Clinics no longer smell like before.
Vibration plate massaging: Frequency massages are often built-in. The post-treatment process thus no longer requires whole-body vibration sessions.
NOTICE FOR THE CONSUMER: CLASS ACTION
GET A REFUND FOR A LIGHT UNIT (BED/POD/PAD) THAT MISREPRESENTED ITS INTENSITY CLAIMS.
Companies are overstating diode output by more than five times the actual level. They measure under the plastic cover or use uncalibrated methods, such as solar power meters instead of red light meters. "The FTC Act prohibits unfair or deceptive advertising in any medium. That is, advertising must tell the truth and not mislead consumers."
If your red light bed fails to deliver the advertised intensity, federal law (and often state laws) entitles you to a refund, financial compensation, or a return.